CAB XENO 4, Assembly Instructions Manual

Page: 30 / 51

30 30
4 Software and Programming
4.9.3 Storing Laser Font files
The following example uses text objects in the job files called 1.wlj and 2.wlj, respectively 1.dat and 2.dat created with
the with the Arial font type. This font type needs to be loaded into the memory of the laser.
Figure 25 Calling the system explorer

Click within the window "Laser System Viewer" on active device and select "Explore...".
Figure 26 Display list font files

Select "Internal flash memory" and type of file "Font" to show laser fonts available.

Select "Add..." to copy laser font from the local PC to the marking laser XENO 4.

Select "Copy to..." to copy laser front from the marking laser XENO 4 to the local PC.
i
Note!
Default directory for laser font files installed on the local PC is: c:\marker\marker\fonts.
Further information about converting TrueType fonts into laser fonts

Documentation software.
!
Attention!
For using the newly installed fonts the laser system must be re-initialized with one of the following
methods:
• Switch off and on the laser system.
• Carry out reset by the control panel

3.2 on page 17.
• Carry out reset by the external control via CON3 - Pin10.