6
6
Electrical Safety
• The device is configured with a power supply for AC voltage from 100 V up to 240 V and have to be connected to
power sockets with protective earth contact..
• Only connect the device to systems with protective extra-low voltage
• Switch off the device before disconnecting electrical connections to peripherals (PC, accessories).
• Only carry out actions described in this installation instructions.
• Improper interventions at electronic components and software may result in malfunctions.
• Maintenance and repair work must solely be carried out by the manufacturer or by skilled staff or service
engineers having been authorized by the manufacturer.
• Parts of the housing and covers have solely to be disassembled by skilled staff.
• The operating and maintenance instructions for the device must be strictly observed.
• Standard operating procedures, regulations for electrical safety and local regulations at the place of installation
must be strictly observed.
• Completely disconnect the device from the mains before starting maintenance work.
• Avoid touching electrical / electronic components. Capacitors may be charged and energized. Electrostatic charge
may result in damages at circuits and electronic boards.
• Always switch off the device at the power switch.
• The device must in no case be operated in case of damaged components opened covers.
Danger!
Danger of life due to mains voltage.
Do not open or remove parts of the housing and covers.