Note: When you use the product alone, we suggest that you use the
default IP setting. If you can not obtain the IP information as HDCP
setting, you can press the “RESET” button of the Encoder to recover
default IP address. The default IP address is 192.168.10.10.
Update page
Firmware update port, open a bin. file and then click “Upgrade” button to
update firmware.
Note:
When the update file is too large, the upgrade progress could stay a
long time in 99%.This is a normal phenomenon. Please do not turn off the
power or press the “RESET” button until the upgrade progress up to 100%.
10/17
