Network page
Network Configuration
◆
In DHCP open status:
DHCP switch: Obtian automatically the network configuration information,
including IP address, Subnet, Gateway.
◆
In DHCP close status:
DHCP switch: If the DHCP switch has been closed, you can set IP, Subnet
,
Gate address. You must pay attention to the Gate address and the IP address
in the same network segment. IP address and Gate address can not the same
in the last address. You don’t need to change the Subnet address. In this moment,
click the “Set” button to save current status information.
Note:
If you have changed the Network Configuration and clicked the “Set”
button. You have changed the IP address, and you can continue use current
Web GUI function. But next time you connect Web GUI, you need to use the
IP address that you set before. The IP address will recover default 192.168.10.10
when the product is set factory reset.
Status button:
Clicking this button will refresh currently network configuration
information to display in Status Log.
Status Log:
Display the Net configuration information.
port:
Set netport port value. The default value is 80.
9/17
