Changing Capture Modes
Continuous Mode
1. Press
Mode
button until
is shown on the LCD panel
2. Hold down the
Shutter
button to take images continuously until the frame count goes down to 00.
NOTE:
In Continuous mode, 6 images will be taken in one second.
Self-Timer
1. Press
Mode
button until
appears on the LCD panel
2. Press
Shutter
button. A beep will sound and the LED will blink for 10 seconds before a photo is
taken.
Deleting Images
Deleting All Images
1. Press
Mode
button until
is shown in the LCD panel.
2. Press
Shutter
button and
will flash in the LCD panel. While
is blinking, press
Shutter
button again. You will hear a beep and all images will be cleared.
NOTE:
If
Shutter
button is not pressed while
is blinking, the frame count will return on the
LCD panel in 5 seconds.
Deleting Last Image Taken
1. Press
Mode
button until
is shown on the LCD panel
2. Press
Shutter
button and the last taken photo will be deleted
Connecting digital camera to PC
Install Arcsoft programs and camera drivers in Windows 98SE/Me/2000/XP
NOTE:
The graphics shown are based on the user interface in Windows 98SE
•
NOTE: If you are running Windows 98 First Edition, Select number
3. Download DirectX 8.0
on
the Installation CD welcome screen to download a copy of DirectX 8.0 from Windows website
for use with your camera. Please be sure internet connection has been made.
1. Place the Installation CD into the CD-ROM drive, The CD-ROM will autorun.
2. Select number 1 on the setup screen to install the Arcsoft software
3. Change Destination Folder if necessary
4. Select components to install
5. Change program folder name if necessary
6. Click
Finish
button to complete Setup
Install camera drivers:
1. Select number 2 on the setup screen to install the camera drivers.
2. Click
Finish
button to complete Setup and restart your computer
3.
After your computer is restarted, connect
to
the camera and computer with the USB cable
. T
he
computer will recognize the camera.
Note:
•
The installed camera drivers may conflict other USB devices in your computer system.
•
NOTE:
If you are running Windows 98 First Edition, Select number
3. Download DirectX 8.0
on
the Installation CD
setup
screen to download a copy of DirectX 8.0 from Windows website
for use with your camera.
You must be connected to the internet to access this link
.
Connecting the
Camera to
Your
PC
1. Take some images with your digital camera
2.
Plug the enclosed USB cable into the camera's USB port and then into your computer's USB
port.
Important:
Do
not
connect camera to PC before drivers are installed.
Downloading Images
Downloading photos using PhotoStudio
NOTE:
The graphics shown are based on the user interface in Windows 98SE
1. Click
Start > Programs> SDC2000 Digital Camera Suite > PhotoStudio 2000
to open the Arcsoft
PhotoStudio program
2. Click
File > Select Source
from the pull-down menu and select "My DSC"
3. Click
File > Acquire
from the pull-down menu to open the following dialog panel. Click
Download
photos
icon.
7
