Electromagnetic Compatibility Notice
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired
operation.
Warning:
Changes or modifications to this unit not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses, and can radiate radio frequency
energy, and if not installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur in a particular
installation.
If the unit does cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try correcting the interference by one or
more of the following measures:
•
Re-orient or relocate the receiving antenna.
•
Increase the separation between the equipment and receiver.
•
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
•
Consult the dealer or any experienced TV/radio technician for help.
NOTE:
•
Shielded cables are used with this unit to ensure compliance with the Class B FCC limits.
•
A high electrostatic discharge environment may cause the camera to malfunction. Reset the camera
by taking out the batteries and re-inserting them.
FCC Notice
In order to maintain compliance with FCC regulations, shielded cables must be used with this equipment.
Operation with non-approved equipment or unshielded cables is likely to result in interference to radio
and TV reception. To comply with the limits for a class B digital device, pursuant to part 15 of the FCC
rules, this device must only be installed on computer equipment certified to comply with the Class B
limits.
In addition, only the supplied USB cable should be used with the product. Operation with non-certified
computers, use of a cable other than that supplied, or modification of the device may result in interference
to radio or television reception and could void the user's authority to operate this device.
Welcome
Thank you for choosing C
*
Pix SDC2000 Digital Camera! To get complete satisfaction from your camera,
please take a moment to read through this manual. Its contents will provide you with a comprehensive
guide to your camera's multiple capabilities.
•
This camera is not resistant to water and should not be used outdoors in snow or rain. If accidentally
dropped in water, please quickly pour out the water. Dry it with sunlight or an air-blower.
•
Protect it from excessive humidity. It will wet the lens and the pictures taken will be blurred.
•
Do not expose the camera to sand
•
Do not attempt to disassemble the camera yourself. Always take it to an authorized service facility
for repair.
•
To store the camera, wrap it in a piece of clean, soft cloth and place it in a cool, dry, dust-free place.
Do not place the camera directly under the sun or in any hot circumstances.
•
Take care of the lens. Use special cloth to clean it.
2
