CD
PLAYER TL53Z
• When operating the remote control, point it towards the remote sensor on the
TL53Z’s front panel. Make sure nothing is blocking the front panel where the re-
mote sensor is located.
• Avoid exposing the remote sensor on the front panel to direct sunlight or other light
sources, as such exposure can cause malfunction.
• The remote control unit may malfunction when its batteries are running low.
Change the batteries to new ones of the same type if this seems to be the case.
• The remote control unit is very heavy and should be handled with care. Dropping it
on fragile surfaces (e.g. glass tables) can result in damage.
Battery Installation
Unscrew the battery compartment cover using a Philips screwdriver, and remove the
cover. Insert the supplied two AA batteries into the compartment. Make sure that
the batteries are inserted with their positive (+) and negative (-) poles positioned cor
-
rectly, and screw the cover back on.
Battery Replacement
If the distance at which the remote control unit can be used to operate the TL53Z
seems to be decreasing, replace both batteries with new ones.
Battery Precautions
• Never use different types of batteries together. Both rechargeable or non-recharge-
able batteries can be used, but the two should not be used together.
• If you will not be using the remote control unit for an extended period of time (more
than a month), remove the batteries to prevent leakage.
Precautions on Using the Remote Control Unit
210
