background image

TL53Z User's Manual

1

should indicate the total number of tracks and the total playing time. 
NOTE: The unit cannot read the disc unless the CD door is closed completely.

5. Push the PLAY/PAUSE (

         

) button to start playback.

The playback indicator and track number should be shown on the display, followed 
by the elapsed time for the track being played.

Pausing Playback

Push the PLAY/PAUSE  (

         

) button to stop playback temporarily. Push this 

button again to resume playback.

Stopping Playback

Push the STOP button (

) to stop playback. 

NOTE: Playback will be stopped automatically if you open the CD door without 
pushing this button, but it will take a few seconds for the turntable to stop spinning. 
Do not touch the stabilizer or the disc until they stop completely. Touching the sta-
bilizer or disc while they are still turning may damage or cause the unit to malfunc-
tion.

Removing a Disc

Slide the CD Door open with your hand, and remove the stabilizer and disc together 
from the turntable. Separate the disc and the stabilizer, and replace the stabilizer on 
the turntable. Close the CD Door.
NOTE: Discs will tend to adhere to the stabilizer when taken out. Make sure not to 
drop the disc by accident.
Do not leave discs on the turntable when the TL53Z is not in use. The stabilizer can 
be kept on the turntable when unused.

Summary of Contents for tl53z




























Reviews: