iNetVu™ Service Manual
Page 18 of 109
2.2.7. Emergency Stop Switch Operation Check
This Maintenance Check is only required for users with Emergency Stop
Switches installed.
Required Materials:
None
Procedure:
1.
Locate the two (2) Emergency Stop Switches located on the Base
Plate.
Fig. 9:
Emergency Stop Switch Location
2.
Clean off any obstructions from the Emergency Stop Switch Assembly.
3.
Using either the iNetVu™ Software or Handheld Controller, manually
move the Antenna, and verify the operation of the BOTH Emergency
Stop Switches.
