BYD S1 EV, User Manual

Page: 79 / 254

3
Con
troller
O
perat
io
ns
3-4 Switch 79
Configuration 2
■
The control lever is used to control
the windshield wiper and scrubber.
The lever is controlled with five
gears:

：
High speed mode

：
Low speed mode

：
Intermittent mode

：
Stop mode

：
Jogging mode
■
To select a level, pull up or push down the control handle.
■
The wiper wipes continuously at low speed and high speed positions.
■
To run the wiper under one-
time wiping mode “ ”, push down the control handle
from “ ” to run the wiper at low speed, till the control handle is released.
■ Under the intermittent mode “ ”,
rotate the intermittent knob on the
wiper switch to prolong the wiping
interval along the narrowing of the
rainfall indicator bar.
Front windshield scrubber
■
To clean the front windscreen, pull
backward (Towards the steering
wheel) the wiper control handle so
that the scrubber sprays washing
fluid and meanwhile the wiper runs.
■
When the control handle is released
or the continuous running time
exceeds 10s, the scrubber stops
spraying and the wiper wipes for 1~2
cycles and then stops. After an
approximately 5s interval, the wiper
wipes once further to remove the
residual water drops from the
windscreen.