2019/08 - Indice de révision : D - Code : 29650
TRAITEMENT DE L'EAU
61/72
9.
WARNING AND ERROR MESSAGES
9.1
Salt concentration too low or too high
When the salt concentration is within acceptable limits , the salt gauge will rise to a point within the ticked
( ) zone.
9.1.1 Salt concentration too low
Low salt, the gauge is below the ticked range. The word 'Low' and
a salt shaker appear:
•
Fixed if the salt concentration is between 2 and 3 g/litre
•
Blinking if the salt concentration is bewteen 1 and 2 g/litre
Below a salt concentration of 1 g/litre
,
the cell will stop producing Chlorine
and the message
NO
CELL
is displayed at the bottom of the LCD screen LCD.
!
IMPORTANT
A low salt warning could be triggered by excessive build up of scale on the electrodes rather than a
real lack of salt. In the event of a low salt warning, check that the electrodes are clean and check the
salt concentration with a suitable tester in case of doubt.
A
faulty temperature sensor
could also cause a low salt warning
9.1.2 Salt concentration too high
High salt, the gauge is above the ticked range. in addition:
•
between 5.5 and 6.5 g/litre, the message "High" is displayed.
•
between 6.5 and 8.0 g/litre, the icon is displayed.
•
Above 8.0 g/litre, both the message and the icon blink.
At a salt concentration above 10.0 g/litre, the cell stops producing Chlorine and the icon
is displayed
to the right of the LCD screen. The high salt icons blink continuously and the message
HIGH SALT
or
SHRT CELL
is displayed at the bottom of the screen.
The salt concentration is lowered by renewing a volume of pool water.
If the salt concentration is higher than 6.5 g/l, a volume of the pool water must be renewed
immediately in order to bring the salt concentration down to an acceptable level.
