EN
23
3 Use
3.1 Intended use
The pharmaceutical Bewades UV unit (“P”) is used to disinfect and
degradate residual ozone in ultrapure water circuits for the production of
pharmaceuticals, cosmetics, medical technology and semi-conductors.
The pharmaceutical UV units are specifically designed for this applica
-
tion. In particular, all media-carrying components are made of stainless
steel no. 1.4404 (corresponds to 316 L) and electropolished (peak-to-
valley height < 0.5 µm).
The intended use implies the unit has been set up, installed and is
operated according to instructions and regulations stated within this
documentation.
3.2 Foreseeable misuse
Operating the system with parameters other than those specified in this
documentation and in section 4.1.
Not adhering to the prescribed maintenance and service intervals.
Using spare parts and consumables not approved by BWT.
3.3 Disclaimer
The manufacturer is released from any liability if the customer intentio-
nally or forcibly removes guards or safety devices, if the customer wilfully
modifies or circumvents the same, or if the customer does not follow the
instructions in this operating manual or on the system.
3.4 Other applicable documentation
Observe all documents from suppliers that were included with delivery.
These are considered part of this documentation and must not be
changed or removed.
1. Electric circuit diagram / Electric cabinet with cabinet overview.
Summary of Contents for Bewades P
Page 16: ...DE 16 12 3 Diagramme...
Page 32: ...EN 32 12 3 Engineering data...