WF-W
K10
0
WiFi Wireless
Cost-effective
Inclinometer
Bewis
Sensing
Technology
LLC
www.bwsensing.com Tel
：
+
86 189
2129 2620
b
Open the software;
c
Click Serial, select serial port mode;
d
Enter the serial port number (Serial line: COM*) and baud rate (Speed: 115200 by default);
e
Click Open to open the serial port;
f Enter a command, and press Enter after typing a command.
Note:
Except for Enter and Backspace, please do not press any non-printing characters (such as up,
down, left, and right, ESC, etc.), otherwise the input command may be wrong, and if not necessary,
please do not enter a space, the same Will cause command errors.
2
Network debugging tools
Note:
Network debugging tools generally only transmit data to a single or a small number of
network connections. When the number of sensors is large, it is recommended to open multiple
debugging tools for multiple port transmission, and each port connects 2-4 sensors, otherwise the
debugging tool may be seriously stuck It even crashes, if you use special software to receive,
theoretically it is not subject to this restriction.
Note:
Some ports may have special functions in the operating system. Please avoid using these ports
for debugging when debugging, otherwise you may not be able to establish a connection or receive
data. According to the regulations of IANA, it is recommended to use the ports 1024~49151 for data
reception first.
