WF-W
K10
0
WiFi Wireless
Cost-effective
Inclinometer
The correct installation method can avoid measurement error. The following points should be
made when installing the sensor:
First of all, to ensure that the sensor mounting surface and the measured surface completely
close, the measured surface should be as horizontal as possible, can not have the angle shown in
Figure A and Figure C, the correct installation is shown in Figure B and Figure D.
the measured surface
the measured surface
C
D
A
B
Secondly, the bottom cable of the sensor and the axis of the measured object shouldn't
generate the angle shown in E. When installing, the bottom cable of the sensor should be kept
parallel or orthogonal to the rotation axis of the measured object. This product can be installed
horizontally or vertically (vertical installation requires customization). The correct installation
method is shown in Figure F.
Finally, the installation surface of the sensor must be fixed with the measured surface tightly
and smoothly, to avoid measurement error that may be caused by the acceleration and vibration.
the measured surface
the measured surface
uneven surface
generates the
angle
uneven surface
generates the
angle
Product installation
Bewis
Sensing
Technology
LLC
www.bwsensing.com Tel
：
+
86 189
2129 2620
