WF-W
K10
0
WiFi Wireless
Cost-effective
Inclinometer
Bewis
Sensing
Technology
LLC
www.bwsensing.com Tel
：
+
86 189
2129 2620
After connecting, check the network properties and record the IPv4 address (here, 192.168.1.100). This
address is to set the receiver IP of the sensor.
b Refer to section 2-1 in "Debugging Method" to open the network debugging tool SSCOM; select "TCPServer" as the
port number; set the port to be listened to (any unoccupied port can be used, here is port 9000 as an example), This port
is to set the receiver port of the sensor; check "HEX display", check "timestamp and sub-packet display" (optional); click
listen, ready to receive data.
