WF-WK100
WiFi Wireless
Cost-effective
Inclinometer
Bewis Sensing Technology LLC
www.bwsensing.com
Tel:
+86 189
2129 2620
Send: FACTORYSALL or AOUT or GENERAL or LOWPWR or NETWORK or SENSOR
or SHELL or FACTORYSE A or AO or G or L or N or SS or SH
Return: OK
1-4
General settings GENERAL
The following commands can set the serial port baud rate, ID, date, date format, time, and time
format of the sensor. In addition to the date and time, you need to send the save command SAVE
+ GENERAL or SAVE+ALL to save.
1-4-1
Set the serial port baud rate
The recommended serial port baud rate range is 2400~460800bps. The baud rate changes after receiving
the return information.
Send: UART+Baud rate
Or U+Baud rate
Return: OK
1-
1-4-2
Set sensor ID
The sensor ID can be used to distinguish multiple sensors when automatically outputting and receiving
HEX commands. This ID is 8-digit hexadecimal data. When configured as a 9-digit ID, the highest bit
can only be 0-9, and it is only valid in the automatic output data in string format (STR). The high-order
0 can be omitted.
Send: ADDR+ID
Or A+ID
Return: OK
