PMCDIO64
Copyright
2000 BVM Ltd.
7
4. Installation
1. PMC modules should only be installed when the host carrier board is in a powered-off condition to
avoid damage to the PMC module and host carrier board.
2. After removing any blanking panels on the host carrier front panel, the PMC module should be
offered up to the host carrier site and the front panel carefully positioned through the host carrier
front panel opening, taking care not to damage the EMC gasket on the PMC module front panel.
3. The PMC module should be fixed to the host carrier using four M2.5 x 6mm pan-head screws into
the four fixing holes provided (two on the front panel and two on the spacers).
4. There is no voltage keying on the PMCDIO64, it will work in both +3.3V and +5V host carriers.
5. The PMCDIO64 can be used with a BVM supplied connecting lead to standard 9-pin D-type
connectors, or a user supplied alternative.
6. Links must be set accordingly for I/O pull-up enable/disable and common select - see section "5.2
7. The installation can be tested with the example software on the Windows
®
Driver Disc - see
section "7.5 Windows
