Buyers 8883200, Manual

Page: 6 / 20

6
• Electric shock or product malfunction may occur if this
product is installed incorrectly.
• Use this product within the voltage range specified.
Failure to do so can cause electric shock or product
malfunction.
• Take special care when cleaning the monitor.
• Make sure to firmly affix the product before use.
• If smoke or a burning smell is detected, disconnect the
system immediately.
• Where the power cable may touch a metal case,
cover the cable with a friction tape. A short circuit or
disconnected wire may cause a fire.
• While installing the Rear View System be careful with
the wire positioning in order to avoid wire damage.
• The Rear View System should only be used when the
vehicle is in reverse.
• Do not install the monitor where it may obstruct drivers
view or obstruct an air bag device.
• Dropping the unit may cause possible mechanical/
electrical failure.
Safety Information