![background image](http://html1.mh-extra.com/html/buyers/8883200/8883200_manual_2836088016.webp)
16
Troubleshooting
Monitor Displays Blue Screen & Displays "No Signal"
• Do a hard reset, disconnect monitor and camera(s) from
power for 1 minute. Reconnect.
• Check that the camera is rec12VDC and that it has
a clean and tight ground connection.
• Verify that the camera is paired to the monitor by following
the procedure on page 10.
• Verify that the trigger on power harness is put to power
+12VDC.
• Verify that vehicle voltage is above 12VDC at all spliced
locations.
Monitor Will Not Power-Up (no backlight on power)
• Check fuse
• Check +12VDC connection
• Check ground connection
• Try power and ground direct to battery
No Image On Screen
• Verify camera is on correct camera input
• Verify monitor power cable is connected.
• Verify camera power cable is connected.
• Connect known working camera and cable to monitor.
• Verify trigger source is supplying power
• Verify power at all connections
• Verify camera pairing
Summary of Contents for 8883200
Page 15: ...15 Positioning...
Page 20: ...20 8883200INST_A...