EN
Page 64 of 96
INSTRUCTION, USE AND
MAINTENANCE MANUAL
14.7.9 ALU-2
ALU-2 function balances wheels with light alloy rims
by fitting adhesive weights on the outside and inside of
the rim. The position of the outer weight is not visible
but hidden inside. Enter the measurements (see Par.
14.2.1 or 14.6.1).
At the end of the procedure, the wheel balancing condi-
tions can be checked by performing a trial spin.
The procedure has now been completed.
14.7.10 ALU-3
ALU-3 function is a procedure that uses mixed weights
to offset wheel unbalance: weight with clip on inner
side of wheel, adhesive weight on outer side, not visible
because inside the rim.
Enter the measurements (see Par. 14.2.1 or 14.6.1)
and proceed as for a dynamic unbalance only for the
inner side of the wheel.
At the end of the procedure, the wheel balancing condi-
tions can be checked by performing a trial spin.
The procedure has now been completed.
14.7.11 ALU-4
ALU-4 function is a procedure that uses mixed weights
to offset wheel unbalance: weight with clip on inner
side of wheel, adhesive weight on outer side.
Enter the measurements (see Par. 14.2.1 or 14.6.1)
and proceed as for a dynamic unbalance only for the
inner side of the wheel.
At the end of the procedure, the wheel balancing condi-
tions can be checked by performing a trial spin.
The procedure has now been completed.
1301-M001-02
LIBRAK360S - LIBRAK360PS - LIBRAK360WS - LIBRAK360PWS - LIBRAK360WSON - LIBRAK360PWSON - LIBRAK360PWSPRO - LIBRAK360PWS-MC - LIBRAK360PWS-OPEL