Butler LIBRAK360PS, Instruction Manual

Page: 19 / 97

INSTRUCTION, USE AND
MAINTENANCE MANUAL
EN
Page 19 of 96
9.2.4 Fitting of external data gauge (stand-
ard on some models)
1. Screw the 4 bolts ( Fig. 15 ref. 1 ) to the gauge
bracket ( Fig. 15 ref. 2 ) and to the threaded rivets
( Fig. 15 ref. 3 ) placed on the machine frame.
Secure the gauge arm ( Fig. 15 ref. 4 ) to the bracket
( Fig. 15 ref. 2 ) using the 2 bolts ( Fig. 15 ref. 5 )
and the washers ( Fig. 15 ref. 6 ). Secure these bolts
with the washers ( Fig. 15 ref. 6 ), the elastic wash-
ers ( Fig. 15 ref. 7 ) and the nuts ( Fig. 15 ref. 8 )
so that the shaft and the gauge arm are levelled out
(see
Fig. 16 ).
Fig. 15
2. At the end of the assembly, manually make sure the
gauge tip ( Fig. 16 ref. 1 ) is able to touch the chuck
head.
Fig. 16
3. Secure the monitor (
Fig. 13 ref. 1
) to the support
(
Fig. 13 ref. 2
) with the bolts (
Fig. 13 ref. 3
) and
the washers (
Fig. 13 ref. 4
) supplied.
4. Connect the plugs on the power supply sockets and
monitor signal. Connect the wiring of the keyboard.
Fig. 13
5. Secure the guard ( Fig. 14 ref. 1 ) to the support
( Fig. 14 ref. 2 ) with the bolts ( Fig. 14 ref. 3 ) and
the washers ( Fig. 14 ref. 4 ) supplied.
Fig. 14
1301-M001-02
LIBRAK360S - LIBRAK360PS - LIBRAK360WS - LIBRAK360PWS - LIBRAK360WSON - LIBRAK360PWSON - LIBRAK360PWSPRO - LIBRAK360PWS-MC - LIBRAK360PWS-OPEL