EN
Page 20 of 96
INSTRUCTION, USE AND
MAINTENANCE MANUAL
3. Connect connector (
Fig. 17 ref. 1
) of the cable
coming from inside the machine to connector
(
Fig. 17 ref. 2
) of the cable coming from the gauge
arm. Fit the section of the cable with the connectors
inside the arm (
Fig. 17 ref. 3
).
4. Fasten the cable with clamps.
5. Enable the external data gauge and carry out the
device calibration.
Fig. 17
9.2.5 Fitting the protection guard
1. Mount the protection guard (
Fig. 18 ref. 1
) to the
support (
Fig. 18 ref. 2
) using the bolts (
Fig. 18
ref. 3
).
2. Adjust the movement of the guard by loosening the
nut (
Fig. 18 ref. 4
) and screwing (rotation braking
increase) or unscrewing (rotation braking decrease)
the dowel (
Fig. 18 ref. 5
).
Fig. 18
1301-M001-02
LIBRAK360S - LIBRAK360PS - LIBRAK360WS - LIBRAK360PWS - LIBRAK360WSON - LIBRAK360PWSON - LIBRAK360PWSPRO - LIBRAK360PWS-MC - LIBRAK360PWS-OPEL
