Page 40 of 61
INSTRUCTION, USE AND
MAINTENANCE MANUAL
EN
13.8.4 Matching mode
The Matching procedure offsets strong unbalance,
reducing the weight quantity to be fitted on the wheel
to achieve balancing. This procedure permits reducing
unbalance as much as possible by offsetting the tyre
unbalance with that of the rim in any used program.
Proceed to unbalance measurement displaying by
performing a standard wheel spin.
THE MATCHING PROCEDURE CAN
BE CARRIED OUT ONLY IF THE
STATIC UNBALANCE IS > 30 G
(1.05 OZ).
Once detected the unbalance values, verify that the
machine displays the ability to use the “matching” op-
tions (
Fig. 30 ref. 4a
).
Press button
to shift to the next screen page.
Press button
to enter the relevant function.
On the monitor the next screen page will be displayed:
STEP 1
. Move the slider on the flange to the "12 o'clock"
position. Make a reference mark, using chalk for in-
stance, on the rim and tyre, in line with the arrow on
the flange, so as to be able to fit the rim back on in the
same position on the machine.
Make a reference mark on the rim and tyre, in line
with the arrow on the flange
Press button
to confirm that step 1 has been
completed.
On the display the next screen page will be displayed:
1296-M024-01
LIBRAK350 - LIBRAK350PRO
