Butler LIBRAK350 Page 37 Instruction Manual Download

Page: 37 / 62

INSTRUCTION, USE AND

MAINTENANCE MANUAL

Page 37 of 61

TWO SMALLER WEIGHTS (55g) (1.94 oz)

USING SPLIT PROCEDURE

Proceed to “DYNAMIC” unbalance measurement dis-
playing by performing a standard wheel spin.

Once detected the unbalance values, verify that the
machine displays the ability to use the "SPLIT" option

(

Fig. 30 ref. 4a

). Press button

to shift to the

next screen page.

Press button

to enter “SPLIT” function.

On the monitor screen will be displayed where you
must enter the value of the weights to be fitted.

Press button

to select the outer weight to edit.

Press buttons

to increase or decrease

the total weight to be fitted.

THE YELLOW VALUE INDICATES

WHICH VALUE IS ACTIVE AND YOU

ARE EDITING.

THE HIGHER THE CHOSEN

WEIGHTS VALUE IS, THE MORE

THEY WILL BE SPACED.

After choosing the value of the weights to be fitted,

press button

to position the wheel for the ap-

plication of the 1st clip weight.

THE TWO GREEN ARROWS INDI-

CATE THAT THE WHEEL IS PROP-

ERLY POSITIONED FOR THE AP-

PLICATION OF THE 1ST WEIGHT.

LIBRAK350 - LIBRAK350PRO

1296-M024-01

Summary of Contents for LIBRAK350































































Search results

Summary of Contents for LIBRAK350

Reviews:

Related manuals for LIBRAK350

Brands by name

Popular brands

Butler LIBRAK350, Instruction Manual

Search results

Summary of Contents for LIBRAK350

Reviews:

Related manuals for LIBRAK350

Brands by name

Popular brands