Butler LIBRAK350 Page 27 Instruction Manual Download

Page: 27 / 62

INSTRUCTION, USE AND

MAINTENANCE MANUAL

Page 27 of 61

SPLIT

program

SPOKES

program

ECO-WEIGHT
Program

MATCHING
program

IF THE GUARD AND REPO-

SITIONING FUNCTION ARE

DISABLED, ON THE BUTTON IN

POS. 7 FIG. 30, YOU WILL SEE

THE

ICON THAT WILL AL-

LOW WHEEL SPIN WITHOUT

RETURNING TO THE PREVIOUS

PAGE. THE POSITIONING OF

THE WHEEL FOR THE APPLICA-

TION OF THE WEIGHTS MUST

BE DONE MANUALLY.

8a – Display of the weights in GRAMS

Set the unit of measurement for weights

display to GRAMS

(see Par. 14.1 “Op-

tions menu”).

On the following screen page:

press the button

to display the weight

with maximum resolution (1g) to be fitted on
the wheel, expressed in grams.

The following screen will appear on the moni-
tor:

Press again the button

to display the

approximated weight to be fitted to the wheel,
expressed in grams.

7b – Display of the weights in OUNCES/GRAMS

Set the unit of measurement for weights

display to OUNCES/GRAMS

(see Par.

14.1 “Options menu”).

On the following screen page:

press the button

to display the weight

with maximum resolution (0.05 oz) to be fitted
on the wheel, expressed in ounces.
The following screen will appear on the moni-
tor:

LIBRAK350 - LIBRAK350PRO

1296-M024-01

Summary of Contents for LIBRAK350































































Search results

Summary of Contents for LIBRAK350

Reviews:

Related manuals for LIBRAK350

Brands by name

Popular brands

Butler LIBRAK350, Instruction Manual

Search results

Summary of Contents for LIBRAK350

Reviews:

Related manuals for LIBRAK350

Brands by name

Popular brands