Bustec ProDAQ 3150 User Manual Download Page 6 | Manualshive

Page: 6 / 56

background image

ProDAQ 3150 User Manual

3150UM-01

Bustec Production Ltd.

Page 5

Chapter 1

Introduction

This manual describes the ProDAQ 3150 Motherboard and explains how to install, configure and program
the ProDAQ 3150 Motherboard with any of the ProDAQ Plug-in Modules and ProDAQ Function Cards.

About the ProDAQ 3150 Motherboard

The ProDAQ 3150 Motherboard provides a VXI interface, a local processor, memory and common resources
like a voltage reference module (optional), trigger routing capability and additional power regulators for up to
eight ProDAQ function cards. The ProDAQ 3150 Motherboard together with the ProDAQ Function Cards can
be configured to provide any function or combination of functions required for a specific application.

The ProDAQ 3150 Motherboard is part of the ProDAQ Modular Data Acquisition System, which consists of
the following components:

A ProDAQ Motherboard that installs into a VXI slot in a VXIbus chassis. A ProDAQ Motherboard can
be populated with a ProDAQ 3250 DSP Plug-in Module (ProDAQ 3150 Motherboard only), a
ProDAQ 3201 Voltage Reference Plug-in Module (optional) and up to eight ProDAQ Function Cards.

The ProDAQ 3220 DSP Plug-in Module that installs into the DSP Plug-in slot on a ProDAQ
Motherboard (ProDAQ 3150 Motherboard only).

The ProDAQ 3201 Voltage Reference Plug-in Module that installs into the Voltage Reference Plug-in
slot on a ProDAQ Motherboard.

The ProDAQ Function Cards which install into ProDAQ Bus slots on a ProDAQ Motherboard.

The  ProDAQ  Signal  Conditioning  Unit  can  be  used  together  with  the  ProDAQ  Modular  Data  Acquisition
System  to  provide  various  signal  conditioning  functions  and  allows  for  easy  connection  to  the  existing
installation.

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

«
...
4
5
6
7
8
...
»

Summary of Contents for ProDAQ 3150

























































Reviews:

No comments

Related manuals for ProDAQ 3150

Brand: Gigabyte Pages: 104

Fatal1ty Professional Z97

Brand: ASROCK Pages: 144

DisplayPort VIP Input Board

Brand: Lattice Pages: 21

Brand: Benezan Electronics Pages: 18

KX224-I2C-EVK-001

Brand: Rohm Pages: 3

Brand: Acconeer Pages: 14

Brand: IEI Technology Pages: 21

Brand: Yamaha Pages: 98

Brand: Yamaha Pages: 105

Brand: Maxim Pages: 33

KD600-H110/Q170

Brand: DFI Pages: 80

Brand: DFI Pages: 59

Brand: DFI Pages: 115

Brand: Dell Pages: 27

Brand: Abit Pages: 32

Brand: Terra Pages: 6

Brand: Global American Pages: 5

Brand: Asus Pages: 64

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands