＿
9
＿
Idle Speed Adjustment
This Multi-cutter is equipped with non-adjustable fuel mixture carburetor. The idle speed is the only adjust-
ment for the operator.
Please see HONDA ENGINES Owner’s Manual.
The cutting attachment may be rotating during idle speed adjustment. Wear the recommended personal
protective equipment and observe all safety instructions. Keep hands and body away from the cutting at-
tachment.
When the throttle trigger is released, the engine should return to an idle speed just below the clutch engage-
ment speed.
The cutting attachment must not rotate and the engine should not stall (stop running) at engine idle speed.
To adjust the engine idle speed, rotate the idle speed adjustment screw on the carburetor.
・
Turn the idle speed screw in (clockwise) to increase the engine idle speed.
・
Turn the screw out (counter-clockwise) to decrease the engine idle speed.
If idle speed adjustment is necessary, and after adjustment the cutting attachment rotates or the
engine stalls, stop using the Multi-cutter immediately!
Contact your local authorized BUSHRANGER Dealer for assistance and servicing.
WARNING
POTENTIAL HAZARD
・
Engine must be running to make carburetor adjustments.
・
When engine is running, attached tool and other parts are
moving.
WHAT CAN HAPPEN
・
Contact with moving attached tool or other moving parts
could cause serious personal injury or death.
HOW TO AVOID THE HAZARD
・
Keep hands, feet and clothing away from attached tool and
other moving parts.
・
Keep all bystanders and pets away from unit while making
carburetor adjustments.
Idle speed adjustment Screw
