_
7
_
Attaching and Detaching for the Power
Unit and the Shaft Assembly
Attaching
1 First, loosen the clamping knob before
attaching the shaft assembly to the shaft cou-
pler.
Note: Do not over loosen the clamping
knob or it may fall out.
2 Insert the shaft assembly to the shaft coupler
with the positioning hole faced up as shown.
Connect the both drive shafts completely in
the matching position by moving the shaft
assembly to forward and backward and left
turn and right turn. When the shaft assembly
is positioned correctly, spring tensioned posi-
tioning lever will be returned to the initial
position.
3 Tighten the clamping knob firmly.
Detaching
1 First, loosen the clamping knob before
detaching the shaft assembly to the shaft
coupler.
2 Pull out the shaft assembly from the shaft
coupler while holding the positioning lever
down.
3 Note: Do not over loosen the clamping knob
or it may fall out.
Clamping
Knob
Shaft Coupler
Positioning
Lever
Positioning Hole
Shaft
Assembly
Positioning
Lever
Positioning lever
is lowered state
Positioning lever
is raised state
Insert
Tighten
Loosen
Incorrect Assembled
Correct Assembled
Clamping
Knob
Shaft Assembly
Positioning
Lever
Removal
Push down
Loosen