Connections
Bringing it all together
Connections
26
If you require any technical guidance or
fi
nd that your TV is not operating as intended, a simple solution can often be found in the
Troubleshooting
section of these instructions,
or online at
www.bush-support.co.uk
.
Before turning your set on, it is recommended that your external devices are connected before continuing with the
fi
rst-time installation process. Depending on the source connectivity on your television, follow the guidance below
when connecting external devices.
HDMI Connection
For optimum picture quality, we recommend connecting your device to the television using an HDMI cable.
HDMI CEC-Compatible Devices
If an HDMI CEC-compatible device (e.g., Blu-ray player, AV receiver) is connected with an HDMI cable, you can
operate the device with the televisions remote control. We recommend using the HDMI (ARC) connection when
used with an AV receiver – please refer to the ARC section of this Operation Manual (Page 26).
Adjusting HDMI CEC Settings
1
.
Turn on the connected device.
2
.
To enable HDMI control, press the
[HOME]
button, then select:
Settings > Device Preferences > Inputs.
3
.
Activate HDMI control on the connected device.
Available options:
HDMI control
Allow the TV to control HDMI devices
Device auto
power o
ff
If disabled, the connected device does not turn o
ff
automatically when the television is turned
o
ff
.
Television auto
power on
If disabled, the television does not turn on automatically when the connected device is turned
on.
CEC Device list
Displays the HDMI CEC device list.
HDMI
HDMI
(A)
(B)
(A)
External Device
(not supplied).
(B)
HDMI cable
(not supplied).
Note
: We recommend authorised Premium High-Speed HDMI Cable(s) bearing the HDMI logo.
BUS-MAN-0035 - 32+ models.indd Sec1:26
BUS-MAN-0035 - 32+ models.indd Sec1:26
20/05/2021 17:28:12
20/05/2021 17:28:12
