Bush CTT61, Instruction Manual

Page: 24 / 28

Product support
Help is always at hand
Product support
24
If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the
Troubleshooting
Troubleshooting
Problem Reason(s) Solution(s)
No power. Power cable not connected
to wall socket.
Power socket is not
switched on.
Make sure the plug is
connected.
Switch the power on.
No sound when connected
to a home stereo system. Volume is too low.
3.5mm audio cable is
connected to the AUX input
socket.
AUX IN source volume is
too low.
Increase the volume.
Remove the cable to
resume normal playback.
Increase the output volume
of the AUX IN source.
The record will not play to
the end. The auto stop setting is set
to the ON position. Set the auto stop switch to
the OFF position and raise
the tone-arm manually
when the record has
finished.
The record is playing too
fast or too slow. Adjust the speed setting. Change the speed selector
to the correct position.