Bush CTT61, Instruction Manual

Page: 19 / 28

Using your Turntable
Let’s get started
Using your Turntable
19
section of these instructions, or online at
www.argos-support.co.uk
If you still require further assistance, call one of our experts on
0345 600 3021
.
Play a record
1.
Before use, ensure the security wire (tone-arm rest/lock) and the cartridge protector
(stylus/cartridge) have been removed. And the tone-arm lock is released.
2. Place a record on the turntable platter (1).
3. Select the speed required using the speed selector switch (8).
4. Raise the tone-arm (2) using the tone-arm lift lever (10). As you move the tone-arm
towards the record the turntable begins spinning. Lower the needle gently onto the
outer edge of the record using the tone-arm lift lever (10).
5. Rotate the ON/OFF/Volume control knob (6) to increase or decrease the volume level.
NOTE: When playing vinyl it is recommended to not close the dust cover
6. When the record has finished playing the platter will stop spinning when the AUTO
STOP switch (9) is set to ON. If you require the platter to continue spinning further into
the centre of a record, set the AUTO STOP switch (9) to OFF.
7.
Raise the tone-arm (2) using the tone-arm lift lever (10), place on the tone-arm rest.