Bush CTT61, Instruction Manual

Page: 14 / 28

Getting to know your Turntable
You’ll be up and running in no time
Getting to know your Turntable
14
If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the
Troubleshooting
Connecting to an external sound system
Should you wish to connect the turntable to an external amplifier follow the below steps.
1. Connect an RCA audio cable (not supplied) to the AUDIO LINE OUT sockets on the
rear of the turntable.
Take care to match the RED/WHITE plugs to the corresponding RED/WHITE sockets.
2. Connect the other end of the cable to an AUDIO INPUT on the amplifier (check your
amplifier user manual if you are not sure).
3.
The volume control on the turntable will have no effect on the volume level when
connected this way. All volume controls should be operated from the amplifier.
Turn the volume on the turntable all the way down, so it does not interfere with the
external sound system.
AUX IN LINE OUT DC IN
L R