Bush CTT61, Instruction Manual

Page: 13 / 28

Getting to know your Turntable
You’ll be up and running in no time
Getting to know your Turntable
13
section of these instructions, or online at
www.argos-support.co.uk
If you still require further assistance, call one of our experts on
0345 600 3021
.
Fitting the legs
Follow the below instructions to install the legs.
1. Ensure the tone-arm lock is engaged and holding the
tone-arm. Lock the dust cover shut with both locking
mechanisms.
2. Turn the unit upside down and place on a firm surface.
3.
Screw each leg into one of the mounting plates
taking
care not to over tighten and noting they are angled
.
4. Turn the unit back over and position the turntable on
a steady surface away from direct sunlight and heat
sources.
Fitting the rubber pads for tabletop usage
If you decide not to use the legs and prefer to place the turntable on a flat surface, we
have supplied 4 x rubber pads to place over the mounting plates for stability and surface
protection.
• Place each pad over the metal mounting plates as shown.