BR330DABC
25
FM Mode
Selecting FM Mode
1. Press
MODE
button repeatedly to select
FM
mode.
2. For initial use, it will start at the beginning of the FM frequency range (87.50MHz). Otherwise, the
last listened FM station will be selected.
3.
To manually change the FM frequency
, while FM frequency shows up, press
or
button to
change the frequency by 0.05MHz.
4.
To automatically scan
, while FM frequency shows up, press
or
button and then press the
SCAN
button, your receiver will skip forward or backward until it reached the next available
station.
Scan setting
This enables you set FM scans stop at stations with strong signal or stop at any available station. By
default, FM scans stop at any available station. This may result in a poor signal-to-noise ratio (hiss)
from weak stations.
1. Press
MENU
button, press
or
button to select 'Scan setting', and then press
OK
button to
confirm.
2. Display will show 'Strong stations only', press or button to select 'YES' and then press
OK
button to confirm. The scans stop only at stations with good signal strength.
3. Press or
button to select ' NO', and then press
OK
button to confirm. The scans stop at any
available station. This may result in a poor signal-to-noise ratio (hiss) from weak stations.
Audio Settings
By default, all stereo stations are reproduced in stereo. For weak stations, this may result in a poor
signal-to-noise ratio (hiss).
1. To play weak stations in mono, press
MENU
button, press
or
button to select ‘Audio
setting’, and then press
OK
button to confirm.
2. Display will show 'Listen in Mono only?' Press or button to select ‘YES’, and then press
OK
button to confirm.
Summary of Contents for BR330DABC
Page 35: ...BR330DABC 35 Menu Map ...
Page 36: ...BR330DABC 36 ...
