Bush Power G3000X, Operating Instructions Manual

Page: 18 / 43

Output and Overload Indicators
The output indicator light (green) will remain lit during normal operating
conditions.
If the generator is overloaded or if there is a short in the connected
appliance, the output indicator light (green) will turn OFF, the overload
indicator light (red) will turn ON and current to the connected appliance will
be shut off.
Stop the engine if the overload indicator light (red) switches ON and
investigate the overload source.
Before connecting an appliance to the generator, check that it is in
good order, and that its electrical rating does not exceed that of the
generator. Then connect the power cord of the appliance , and start
the engine.
Be sure all equipment is turned off before plugging in the power
cord.
When an electric motor is started, both the overload indicator light (red)
and the output indicator light (green) may go on simultaneously. This
is normal if the overload indicator light (red) goes off after about four
seconds.
If the overload indicator light (red) stays on, consult your dealer.
1. Connect the ground terminal