Bush Power G3000X, Operating Instructions Manual

Page: 17 / 43

•
Limit length of extension cables 60m for cables of 1.5mm2 and 100m
for cables of 2.5mm2.
•
Keep the generator away from other electric cables or wires such as
distribution network.
•
The DC receptacle can be used while the AC power is in use. If you
use both at the same time, be sure not to exceed the total power for
AC and DC.
•
Most appliance motors require more than their rated wattage for start-
up.
AC applications
1. Start the engine and make sure the output indicator light (green)
illuminates.
2.
Confirm that the appliance to be used is switched off, and plug it in to
the generator.
•
Substantial overloading that continuously lights the overload indicator
light (red) may damage the generator . Marginal overloading that
temporarily lights the overload indicator light (red) may shorten the
service life of the generator.
•
Be sure that all appliances are in good working order before
connecting them to the generator, if an appliance begins to operate
abnormally, becomes sluggish, or stops suddenly, turn off the
generator engine switch immediately. Then disconnect the appliance,
and examine it for signs of malfunction.