Bush Power G3000X, Operating Instructions Manual

Page: 13 / 43

Choosing the right choke position is the key to starting the motor. You may
have to practise a few times to use the choke correctly
Shove the choke completely to the right to restart a hot motor.
Shove the choke to about halfway to restart a warm motor.
A hot motor will not start if there is too much fuel in the cylinder. If
this happens, wait five to ten minutes before trying again. Shove the
choke completely to the right and the motor should start.
4. Set the motor switch in the “ON” position
5. Pull slightly on the start cord until you feel resistance and then yank
hard and swiftly.
Do not let the start cord retract by itself: guide it back by hand.
Hold the carrying handle firmly to prevent the generator from falling
over when you pull the start cord.