Bush Hog HT625H, Operator'S Manual

Page: 32 / 76

ASSEMBLY
HT625H 03/19 Assembly Section 3-2
© 2019 Alamo Group Inc.
ASSEMBL
Y
DELIVERY AND ASSEMBLY
Checking the Machine on Delivery
All parts are carefully checked before dispatch or delivery.
On receiving the machine, ensure that it has not been damaged during transport. If damage has occurred,
contact the dealer concerned.
Details of packing are given below.
Unpacking the Machine
• Lift the machine using a forklift truck, crane or other suitable equipment of sufficient capacity after first
checking the weight of the configurations in the table given below.
• Check the stability and positioning of the load on the forklift truck forks or crane hook.
• Keep the load as low as possible during movement for maximum stability and to ensure that the operator
has maximum visibility.
• If a forklift truck is used, ensure that the forks are positioned as wide apart as possible.
MACHINE Weight Packing KG/LBS Weight KG/LBS
HT625H 1250/2750 1120/2470
NOTE:
1. The packing consists mainly of wood, which should be disposed of according to the lows in force in the
country where the machine is used. The plastic film should also be disposed of according to the lows in
force in the country where the machine is used.
2. When storing, it is permissible to stack 2-3 crates on top of each other. Make sure that they are perfectly
aligned cortically.
3. In the event of further transport, ensure that the machine when on the transporting vehicle.