Bush Hog HT625H, Operator'S Manual

Page: 51 / 76

OPERATION
HT625H 03/19 Operation Section 4-11
© 2019 Alamo Group Inc.
OPERA
T
ION
Take particular care when connecting the two
Driveline shaft end forks and make sure that they
are fully secured. This is achieved by inserting the
safety pins and bolts (1) in the special slots (2) on
the power takeoff shafts on both the tractor and
implement ends. Refer To
Image OP-226 .
8. PRE-OPERATION INSPECTION AND SERVICE
Before each use, a pre-operation inspection and service of the implement and tractor must be performed.
This includes routine maintenance and scheduled lubrication, inspecting that all safety devices are equipped
and functional, and performing needed repairs. DO NOT operate the unit if the pre-operation inspection
reveals any condition affecting safe operation. Perform repairs and replacement of damaged and missing
parts as soon as noticed. By performing a thorough pre-operation inspection and service, valuable down time
and repair cost can be avoided.
OPS-U-0029
Periodically inspect all moving parts for wear and replace when
necessary with authorized service parts. Look for loose fasteners, worn
or broken parts, and leaky or loose fittings. Make sure all pins have
cotter pins and washers. Serious injury may occur from not maintaining
this machine in good working order.
(SG-21)