Bush Hog HT625H, Operator'S Manual

Page: 60 / 76

OPERATION
HT625H 03/19 Operation Section 4-20
© 2019 Alamo Group Inc.
OPERA
T
ION
10.4 Shutting Down the Implement
To shut down the implement, first bring the tractor
to a complete stop. Then slow down the implement
by reducing the engine speed before disengaging
the PTO. Wait for all motion to stop before
proceeding to drive or shut down the tractor.
Park the tractor on a level surface, place the
transmission in park or neutral and apply the
parking brake, lower the attached implement to the
ground, shut down the engine, remove the key, and
wait for all motion to come to a complete stop
before exiting the tractor.
OPS-HT- 0016_A
11. DISCONNECTING THE HAY TEDDER FROM THE TRACTOR
Before disconnecting the hay tedder, the PTO must be disengaged and all movement must cease. Move the
hay tedder to a level storage location and lower the unit to the ground. If the hay tedder is not resting securely
on the ground, block the hay tedder up securely before attempting to disconnect it from the tractor.
Use extreme care to keep feet and hands from under the hay tedder and clear of any pinch points. OPS-HT-
0051
Always shut the Tractor completely down, place the transmission in park, and set the
parking brake before you or anyone else attempts to connect or disconnect the Implement
and Tractor hitches.
(S3PT-15)