Bush Hog HT625H, Operator'S Manual

Page: 36 / 76

ASSEMBLY
HT625H 03/19 Assembly Section 3-6
© 2019 Alamo Group Inc.
ASSEMBL
Y
Hydraulic System
6. Assemble the Oledynamic System so that the
tubes are arranged as shown in AsmP-HT-
0013. Pipes should be released in this phase
(the hose clamps must not be tightened). After
connecting machine to tractor, lift the machine,
place hoses so that they do not bind and cause
tension. Tighten hose clamps.
Spring Rods
Open the machine in its working position and connect the Oledynamic System to the tractor. Insert the spring
rod into position and then raise the side arms. As the arm rises, it compresses the spring. Use the hole in the
tube to uncover the hole on the spring guide rod. Stop the cylinder and insert the elastic pin through the hole in
the rod so that the pin does not touch the tube.