Bush Hog DHP10, Operator'S Manual

Page: 48 / 68

OPERATION
DHP8, DHP10, DHP12 05/21 Operation Section 4-14
O
PE
R
AT
IO
N
© 2021 Alamo Group Inc.
• Perform scheduled lubrication as detailed in the maintenance section.
• Ensure all decals are in place and legible.
• Ensure that a properly rated safety tow chain is equipped securing the implement to the tractor.
• Before operation check disc blades and spools for breakage or cracking and replace if needed.
• Inspect Disc Gang and grease after every 8 hour use.
• Inspect all bolts and screws and tighten to the recommended torque.
• Before operation check disc blades and spools for breakage or cracking and replace if needed.
• Inspect Disc Gang and grease after every 8 hour use.
• Inspect all bolts and screws and tighten to the recommended torque.
• Inspect tire condition, wheel bearings, and lug nut torque.
• Inspect all bolts and screws and tighten to the recommended torque.
The operator’s manual and safety signs affixed on
the unit contain important instructions on the safe
and proper use of the equipment. Maintain these
important safety features on the implement in good
condition to ensure the information is available to
the operator at all times.
•
Ensure the manual canister is secured to the
equipment with the operator’s manual inside.
• Ensure all safety signs are in place and legible.
Replace missing, damaged, and illegible
decals.
OPS-U- 0011