![background image](http://html1.mh-extra.com/html/bush-hog/dhm-series/dhm-series_operators-manual_2834793094.webp)
ASSEMBLY
DHM 8, 9, 10 05/19
Assembly Section 3-6
© 2019 Alamo Group Inc.
ASSEMBL
Y
Refer to fig. AsmP-D-0017 and carry out the following steps in the order indicated:
1. Mount hook 1 as in Fig. Asm-D-0026 with pin 2 and fasten with two spring pins (ø6x40 - ø15/64x1-36/64)
and two washers (ø26 - ø1').
2. Mount spring 3 as in Figure.
3. Mount the lever 5 as in Figure with screw 6 (M8x45 - 5/16”x1-49/64”), and locknut without tightening fully.
4. Mount the threaded rod 7 and ball joint on point 9 with nut M8. The distance A should be 504MM (19-53/
64”).
5. Mount the ball joint on point 8 of lever 5 with self-locking nut M8 as in figure.
6. Fasten rod 7 on point 10 with special hexagon pin and one split pin (ø3x30 - ø7/64x1-11/64”).
7. Mount rope in hole 4 with a node.
Pin for spring
Pin for tie-rod
Summary of Contents for DHM Series
