![background image](http://html1.mh-extra.com/html/bush-hog/dhm-series/dhm-series_operators-manual_2834793099.webp)
ASSEMBLY
DHM 8, 9, 10 05/19
Assembly Section 3-11
© 2019 Alamo Group Inc.
ASSEMBL
Y
Refer to Figure Asm-D-0035 and carry out the following steps in the order indicated:
1. Mount protection canvas with the opening for
cylinder and spring bar in right position. Fasten
all the belt of the canvas.
2. Mount plugs (ø33.7x3-1-5/16”x7/64”) for pipe 1
and 2.
3. Make three holes 10, on protection canvas as
shown for screws 5 (M10x25-25/64”x1”) to
assembly support 1 and 2, and fasten with
washer 7 and nut 6.
4. Use screws 3 (M10x75-25/64”x2-15/16”) and
self-locking nuts 4 to mount support 1 and 2,
but not fully tighten to make them pivoting.
5. Mount pivoting spring 8 on pins 9.
Refer to Figure Asm-D-0036 and carry out the following steps in the order indicated:
1. Use two screws 8 M6x16(D15/64”x5/8”) and
large washers 6 to assemble casing 7.
2. Insert the two hoist pins 13 int their respective
slots and use screws 22 M8x80 (5/16x3-9/64””),
nuts 21 to fasten into the position which best
suits the dimensions of the tractor.
3. Insert clamp 12 of hoist chain 11 on one of the
hoist pins 13 and fasten with washer 14 (ø8x50-
ø25-ø1”) and spring pin 15 (ø8x50-ø5/16”x1-
61/64”).
4. Insert cardan shaft hook 24 in one hole of 3rd
point and use clip 20 to lock it when machine is
operating.
5. Pin 25 is used for the 3rd point tractor attach.
Summary of Contents for DHM Series
