![background image](http://html1.mh-extra.com/html/bush-hog/dhm-series/dhm-series_operators-manual_2834793110.webp)
OPERATION
DHM 8, 9, 10 05/19
Operation Section 4-10
© 2019 Alamo Group Inc.
OPERA
TION
6.1 Connecting the Mower
The disc mower can be adapted to tractors with
various gauges by placing the two hoist arms as
shown, so that distance A is about 5 cm (2 inches)
when the machine is in the work position. In order
to obtain the various positions in Ops-2400, slide
the pins 13, shown in Ops 2401 tin the respective
slots and fasten into position with screws 22 and
nut 21 in one of the adjustment holes 23 on the
pins.
1. If necessary, move the vertical movement
adjuster tie rod on the hoist arms until both ball-
and-socket joints are at the same height above
ground.
2. Fasten the two tractor hoist arms into pins 13
and lock with pegs 24.
3. Fasten the third point tractor 1 in Figure Ops-
2403 and adjust it so the axle E is vertical.
4. Raise the machine with the tractor’s hydraulic
lift. Pull up stand A (Ops-2404) until it hooks
onto the lock spring B.
When working and during transport, the Stand A must be locked into the lock spring B.
Summary of Contents for DHM Series
