Installation and Commissioning | 5
Instruction Manual PLUS Master Control R5 PLUS_EN_en
7 / 44
5
Installation and Commissioning
5.1 Vacuum Pumps Installation
NOTICE
Installation and electrical connection.
Risk of damage to the machine!
• For the installation and electrical connection of each vacuum pump in the vacuum sys-
tem, please refer to the instruction manual(s) of the respective pump(s).
WARNING
Vacuum line.
Risk of severe injury!
Risk of damage to the machines and the system!
• All PLUS vacuum pumps must be connected on the suction side to a common piping
line. The piping must be sized (diameter, length) according to the total capacity of the
vacuum system and the specificities of the process. Contact your Busch representative
for more information.
Vacuum line*
*not included in the scope of delivery of the vacuum pumps
External Pressure Sensor
Optionally, it is possible to control the system from the signal of an external pressure
sensor (not included in the scope of delivery of the vacuum pump), installed on a vacu-
um tank for example. In this case this sensor must be connected to the PLUS Master
pump. For the electrical connection and setting of the sensor, refer to the instruction
manual(s) of the respective pump(s).
NOTE
Contact Busch for more information.
Summary of Contents for PLUS Master Control
Page 43: ...Note...