BUSCH PLUS Master Control, Instruction Manual, Page: 12 / 44

5 | Installation and Commissioning
12 / 44 Instruction Manual PLUS Master Control R5 PLUS_EN_en
• Then define one of the vacuum pumps as the “PLUS Master” and the other pumps as
“PLUS Controlled” pumps, in the control mode menu of each pump. The “PLUS Mas-
ter Control” interface will be displayed on the screen of the Master pump, see
Bottom
Bar [ ► 4]
.
In the control interface of the Master vacuum unit:
• Go to “OPERATIONS” > “MODE”.
• Access to the third screen.
PREVIOUS
HOME
MODE
OPERATIONS
PARAMETERS
MAINTENANCE SYSTEM
WEEK PLANNER
Control mode
Manual Auto
Modbus control
Start / Stop
Local
Remote
Analog speed control
Digital speed control
Plus Master Plus Controlled
• Switch to « Remote / PLUS Master », password required
►
Role 2, see Role and User
[ ► 6]
.
ð
For further information, refer to the chapter “Remote Control” in the specific docu-
ment “Pump Control Instructions, art.0870213261”.
• A new icon appears in the bottom status bar of the user interface. This icon is used to
toggle between the "Home" menus of the pump control interface and the system
control interface display.
01.08.2020 - 15:00
?
01.08.2020 - 15:00
?
OFF
OFF
PLUS Master Control icon
(appears when the PLUS Vacuum Pump control interface is displayed)
PLUS Vacuum Pump icon
(appears when the PLUS Master control interface is displayed)