BUSCH PLUS Master Control, Instruction Manual, Page: 35 / 44

Maintenance | 8
Instruction Manual PLUS Master Control R5 PLUS_EN_en 35 / 44
8 Maintenance
WARNING
The machine may start without notice.
Risk of severe injury!
• Make sure that the lockable disconnect switch is activated and protects the machine
against inadvertent start up.
• The power indicator light (PIL) must be turned off.
The PLUS Master interface allows the monitoring and planning of maintenance opera-
tions to be carried out on the PLUS vacuum pumps that are part of the system.
– The remaining hours until the next maintenance, as well as the total operating hours
of the pump, can be visualized on the information page of each vacuum pump in the
PLUS Master Control interface.
To visualize the remaining hours until the next maintenance:
• Go to "OPERATIONS > PUMPS".
• The information about running hours is available in the page specific to each of the
PLUS pumps in the system (VP1, VP2,...).
HOME OPERATIONS
TREND SETTINGS
Running hours
15792 h
RA 0760 A PLUS
Master
Running
70%
VP1 VP2 VP3 VP4 VP6 VP5
VP1
Next service
2340 h
Serial number
CHM120400012
Disabled
Auto
PUMPS ECOMODE
WEEK PLANNER
PARAMETERS
NEXT PREVIOUS
HOME
OPERATIONS
TREND
SETTINGS
Running hours
15632 h
RA 0760 A PLUS
Controlled
Running
70%
VP1 VP2 VP3 VP4 VP6 VP5
VP2
Next service
2400 h
Serial number
CHM120400234
Disabled
Auto
PUMPS ECOMODE
WEEK PLANNER PARAMETERS
NEXT PREVIOUS