2 | Introduction
4 / 44
Instruction Manual PLUS Master Control R5 PLUS_EN_en
2
Introduction
PLUS Master Control
The PLUS Master Control makes it possible to interconnect several PLUS units and makes
them work together optimally from the point of view of pressure regulation, overall
power consumption and operating hours.
It is thus easy to create a vacuum system from several PLUS vacuum pumps without the
need for an additional control cabinet.
NOTICE
Installation, settings and operation of the pumps in PLUS Master control mode.
This mode requires the PLUS vacuum pumps to be interconnected with each other via
an Ethernet connection. A total number of 2 to 6 PLUS pumps is supported.
NOTE
Instruction manual for the PLUS Master Control.
This document is only delivered on request and intended for "Role 2" and “Role 3” peo-
ple, see
It contains additional information about advanced settings for the use of the “PLUS
Master control” function.
When mentioned, please refer to the specific document “Pump Control Instructions, art.
no. 0870213261”.
Please also refer to the original instruction manual of the corresponding machine which
content remains valid.
NOTE
Illustrations
In this instruction manual the illustrations may differ from the machine appearance.
3
Bottom Bar
The bottom bar provides different pieces of information, in particular the machine state
and warning/alarm status.
?
01.08.2020 - 15:00
OFF
RUNNING
WARNING
ALARM
Machine state
Warnings and alarms
status
Date and hour
Screen
brightness
Help
PLUS Master Control icon
PLUS Vacuum pump icon
The PLUS Master Control interface is accessible on the Master pump control touchscreen
(see
Installation and Commissioning [
Setting of the PLUS Vacuum Pumps
).
On this particular pump, which can be freely selected among all pumps in the system, an
additional icon in the status bar toggles between the “PLUS Vacuum pump” interface
and the “PLUS Master Control” interface.
Summary of Contents for PLUS Master Control
Page 43: ...Note...