BUSCH PLUS Master Control, Instruction Manual, Page: 15 / 44

Installation and Commissioning | 5
Instruction Manual PLUS Master Control R5 PLUS_EN_en 15 / 44
• In the page specific to each of the PLUS pumps in the system (VP1, VP2,...), switch
the pump to the “Auto” mode, password required
►
Role 2, see Role and User [ ► 6] .
HOME
OPERATIONS
TREND SETTINGS
Running hours
15792 h
RA 0760 A PLUS
Master
Auto
0%
VP1 VP2 VP3 VP4 VP6 VP5
VP1
Next service
2340 h
Serial number
CHM120400012
Disabled
Auto
PUMPS ECOMODE WEEK PLANNER PARAMETERS
NEXT PREVIOUS
Once Ethernet communication is established and the pumps are set to “Auto” mode, the
setting of the PLUS Master Control system is completed.
All vacuum pumps in the system and their status are displayed in the main screen of the
PLUS Master Control interface. The PLUS pumps in “Auto” status are integrated into the
system and ready for operation. The vacuum pumps with “N/A” status are not parame-
terized, and correspond to pumps that can be added to the system at a later stage in
case of extension.
?
01.08.2020 - 15:00
HOME OPERATIONS
TREND SETTINGS
Instant absorbed power
Inlet pressure Target pressure
17.0 kW
50 mbar 49 mbar
PLUS Master regulation
VP1 VP2 VP3 VP4 VP6 VP5
Auto
0%
Auto
0%
N/A
RUNNING
Stop
Auto
0%
Auto
0%
Auto
0%